![]() ![]() For example, don’t try to mix 0.1MM layer height and 10% infill. ![]() Layer heights smaller than can cause inconsistent results, unless you have your part geometries and print settings perfectly optimized for the part.Īs you use smaller layer heights, you will find that you need to use more infill. Layer heights larger than this will result in very weak layer-to-layer bonding. So for example, a 0.4mm nozzle can easily print layer heights from 0.05-0.30mm. Your layer height should be between 25% and 75% of your nozzle diameter. Here are tips from Fusion3’s support team to avoid common pitfalls: With all the different ways to customize and configure Simplif圓D, it is also easy to accidentally cause problems that will negatively impact your print quality. ![]() Simplif圓D has a wide variety of settings you can customizeįusion3 bundles Simplif圓D with our 3D printers as this slicer software is both easy to use and very powerful for advanced users. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |